Regviz

Freescale Semiconductor /MKW21Z4 /RX_DIG /CCA_ED_LQI_CTRL_1

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as CCA_ED_LQI_CTRL_1

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Freescale Semiconductor/MKW21Z4/RX_DIG/CCA_ED_LQI_CTRL_1#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0RSSI_NOISE_AVG_DELAY 0 (0)RSSI_NOISE_AVG_FACTOR 0 (0)LQI_RSSI_WEIGHT 0LQI_RSSI_SENS 0 (0)SNR_LQI_DIS 0 (0)SEL_SNR_MODE 0 (0)MEAS_TRANS_TO_IDLE 0 (0)CCA1_ED_EN_DIS 0 (0)MAN_MEAS_COMPLETE 0 (0)MAN_AA_MATCH 0 (0)SNR_LQI_WEIGHT 0LQI_BIAS

SEL_SNR_MODE=0, SNR_LQI_DIS=0, LQI_RSSI_WEIGHT=0, MAN_AA_MATCH=0, RSSI_NOISE_AVG_FACTOR=0, SNR_LQI_WEIGHT=0, MEAS_TRANS_TO_IDLE=0, MAN_MEAS_COMPLETE=0, CCA1_ED_EN_DIS=0

Description

RX_DIG CCA ED LQI Control Register 1

Fields

RSSI_NOISE_AVG_DELAY

RSSI Noise Averaging Delay
RSSI_NOISE_AVG_FACTOR

RSSI Noise Averaging Factor

0 (0): 1

1 (1): 64

2 (2): 70

3 (3): 128

4 (4): 139

5 (5): 256

6 (6): 277

7 (7): 512
LQI_RSSI_WEIGHT

LQI RSSI Weight

0 (0): 2.0

1 (1): 2.125

2 (2): 2.25

3 (3): 2.375

4 (4): 2.5

5 (5): 2.625

6 (6): 2.75

7 (7): 2.875
LQI_RSSI_SENS

LQI RSSI Sensitivity
SNR_LQI_DIS

SNR LQI Disable

0 (0): Normal operation.

1 (1): The RX_DIG CCA/ED/LQI block ignores the AA match input which starts an LQI measurement.
SEL_SNR_MODE

Select SNR Mode

0 (0): SNR estimate

1 (1): Mapped correlation magnitude
MEAS_TRANS_TO_IDLE

Measurement Transition to IDLE

0 (0): Module transitions to RSSI state

1 (1): Module transitions to IDLE state
CCA1_ED_EN_DIS

CCA1_ED_EN Disable

0 (0): Normal operation

1 (1): CCA1_ED_EN input is disabled
MAN_MEAS_COMPLETE

Manual measurement complete

0 (0): Normal operation

1 (1): Manually asserts the measurement complete signal for the RX_DIG CCA/ED/LQI blocks. Intended to be used only for debug.
MAN_AA_MATCH

Manual AA Match

0 (0): Normal operation

1 (1): Manually asserts the AA match signal for the RX_DIG CCA/ED/LQI and AGC blocks. Intended to be used only for debug.
SNR_LQI_WEIGHT

SNR LQI Weight

0 (0): 0.0

1 (1): 1.0

2 (2): 1.125

3 (3): 1.25

4 (4): 1.375

5 (5): 1.5

6 (6): 1.625

7 (7): 1.75

8 (8): 1.875

9 (9): 2.0

10 (10): 2.125

11 (11): 2.25

12 (12): 2.375

13 (13): 2.5

14 (14): 2.625

15 (15): 2.75
LQI_BIAS

LQI Bias.

Links

()

Register License

Redistribution and use in source and binary forms, with or without modification,\nare permitted provided that the following conditions are met:\n o Redistributions of source code must retain the above copyright notice, this list\n of conditions and the following disclaimer.\n o Redistributions in binary form must reproduce the above copyright notice, this\n list of conditions and the following disclaimer in the documentation and/or\n other materials provided with the distribution.\n o Neither the name of Freescale Semiconductor, Inc. nor the names of its\n contributors may be used to endorse or promote products derived from this\n software without specific prior written permission.\n THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND\n ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\n DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR\n ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\n (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\n LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON\n ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data